D-Link DGS-3200 SERIES - IGMP Snooping

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
103
Example
DGS-3200-10:4#delete syslog host 4
Command: delete syslog host 4
Success
DGS-3200-10:4#
8-13 show syslog host
Purpose
Used to display syslog host configurations.
Format
show syslog host {<index 1-4>}
Description
The show syslog host command displays the syslog host configurations.
Parameters
Parameters Description
index
The host index.
If no parameter is specified, all hosts will be displayed .
Restrictions
None.
Example
DGS-3200-10:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severity Facility UDP port Status
------- --------------- -------------- -------- -------- --------
1 10.1.1.2 All Local0 514 Disabled
2 10.40.2.3 All Local0 514 Disabled
3 10.21.13.1 All Local0 514 Disabled
Total Entries : 3