D-Link DGS-3200 SERIES - Delete Authen Server_Group

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
306
protocol xtacacs
The server host’s authentication protocol.
protocol tacacs+
The server host’s authentication protocol.
protocol radius
The server host’s authentication protocol.
Restrictions
You must have administrator privilege.
Examples
To add an authentication server host to a server group:
DGS-3200-10:4#config authen server_group mix_1 add server_host 10.1.1.222 protocol
tacacs+
Command: config authen server_group mix_1 add server_host 10.1.1.222 protocol ta
cacs+
Success.
DGS-3200-10:4#
36-16 delete authen server_group
Purpose
Used to delete a user-defined authentication server group.
Format
delete authen server_group <string 15>
Description
Delete a user-defined authentication server group.
Parameters
Parameters Description
string 15
The user-defined server group name.
Restrictions
You must have administrator privilege.
Examples
To delete a user-defined authentication server group: