D-Link DGS-3200 SERIES - Appendix E - Mitigating ARP Spoofing Attacks Using Packet Content ACL

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
243
DGS-3200-10:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Fast Leave : Disabled
Version : 3
Total Entries: 1
DGS-3200-10:4#
32-8 show igmp_snooping group
Purpose
Used to display the current IGMP snooping group configuration on the switch.
Format
show igmp_snooping group {vlan <vlan_name 32>| vlanid <vlanid_list>}
Description
The show igmp_snooping group command displays the current IGMP snooping group configuration on
the switch.
Parameters
Parameters Description
vlan_name
The name of the VLAN for which you want to view IGMP snooping
group configuration information.
If no parameter specified, the system will display all current IGMP
group snooping configuration of the switch.