D-Link DGS-3200 SERIES - Disable Ssl

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
319
Examples
To enable the SSL ciphersuite for RSA_with_RC4_128_MD5:
DGS-3200-10:4# enable ssl ciphersuite RSA_with_RC4_128_MD5
Command: enable ssl ciphersuite RSA_with_RC4_128_MD5
Success.
DGS-3200-10:4#
To enable SSL:
DGS-3200-10:4# enable ssl
Command: enable ssl
Success.
DGS-3200-10:4#
37-4 disable ssl
Purpose
Used to disable SSL feature and ciphersuites.
Format
disable ssl { ciphersuite { RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5 } }
Description
This command disables the SSL feature and supported ciphercuites. Using the “disable ssl” command
will disable the SSL feature and each individual ciphersuite.
Parameters
Parameters Description
ciphersuite
For configuring cipher suite combination.
RSA_with_RC4_128_MD5
Indicates RSA key exchange with RC4 128 bits
encryption and MD5 hash.
RSA_with_3DES_EDE_CBC_SHA
Indicates RSA key exchange with 3DES_EDE_CBC
encryption and SHA hash.