D-Link DGS-3200 SERIES - Show Mac_Notification Ports

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
168
Format
show mac_notification
Description
Used to display the switch’s MAC address table notification global settings.
Parameters
None.
Restrictions
None.
Examples
To show the switch’s MAC address table notification global settings:
DGS-3200-10:4#show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 500
DGS-3200-10:4#
18-6 show mac_notification ports
Purpose
Used to display the port’s MAC address table notification status settings.
Format
show mac_notification ports{<portlist>}
Description
Used to display the port’s MAC address table notification status settings.
Parameters
Parameters Description
portlist
Specifies a range of ports to be configured.