D-Link DGS-3200 SERIES - Port Utilization

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
181
20-9 show vlan
Purpose
Used to show the VLAN information including of parameters setting and operational value.
Format
show vlan { <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>}
Description
The show vlan command displays summary information about each VLAN, which includes: VLAN ID,
VLAN Name, Tagged/Untagged/Forbidden status for each port, and Member/Non-member status for each
port.
Parameters
Parameters Description
vlan_name
The name of the VLAN to be displayed.
vlandid
The VLAN ID number to be displayed.
ports
A range of ports for which you want to display VLAN. The beginning
and end of the port list range are separated by a dash.
Restrictions
None.
Examples
To display VLAN settings.
DGS-3200-10:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN TYPE : static Advertisement : Enabled
Member ports : 1-7
Static ports : 1-6
Current Tagged ports:
Current Untagged ports : 1-7
Static Tagged ports:
Static Untagged ports : 1-6
Forbidden ports :
Total Entries : 1
DGS-3200-10:4#