D-Link DGS-3200 SERIES - Config Authen_Login; Create Authen_Login Method_List_Name

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
295
DGS-3200-10:4#show authen_policy
Command: show authen_policy
Authentication Policy : Enabled
DGS-3200-10:4#
36-4 create authen_login method_list_name
Purpose
Used to create a user-defined method list of authentication methods for user login.
Format
create authen_login method_list_name <string 15>
Description
Create a user-defined method list of authentication methods for user login. The maximum supported
number of the login method lists is eight.
Parameters
Parameters Description
string 15
The user-defined method list name.
Restrictions
You must have administrator privilege.
Examples
To create a user-defined method list for user login:
DGS-3200-10:4#create authen_login method_list_name login_list_1
Command: create authen_login method_list_name login_list_1
Success.
DGS-3200-10:4#
36-5 config authen_login
Purpose
Used to configure a user-defined or default method list of authentication methods for user login.