D-Link DGS-3200 SERIES - Show Snmp View

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
71
6-7 show snmp view
Purpose
Used to display the SNMP view record.
Format
show snmp view {<view_name 32>}
Description
The show snmp view command displays the SNMP view record.
Parameters
Parameters Description
view_name
View name of the user who likes to show.
Restrictions
You must have administrator privileges.
Example
DGS-3200-10:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
-------------------- ------------------------- ----------
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Included
Total Entries: 8
DGS-3200-10:4#