D-Link DGS-3200 SERIES - Show Fdb

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
162
Description
The show multicast_fdb command displays the contents of the switch’s multicast forwarding database.
Parameters
Parameters Description
vlan_name 32
The name of the VLAN on which the MAC address resides. The
maximum length is 32.
macaddr
Specifies a MAC address, for which FDB entries will be displayed.
If no parameter is specified, all multicast fdb entries will be displayed.
Restrictions
None.
Examples
To display multicast MAC address table:
DGS-3200-10:4#show multicast_fdb
Command: show multicast_fdb
VLAN Name : default
MAC Address : 01-00-5E-00-00-00
Egress Ports : 1-5,26
Mode : Static
Total Entries : 1
DGS-3200-10:4#
17-9 show fdb
Purpose
Used to display the current unicast MAC address forwarding database.
Format
show fdb { port <port> | vlan <vlan_name 32> | mac_address <macaddr> | static | aging_time }
Description
The show fdb command displays the current unicast MAC address forwarding database.