D-Link DGS-3200 SERIES - Show Stp Mst_Config_Id

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
144
Format
show stp ports {<portlist>}
Description
This command displays each port's parameter settings. If the portlist is not input, all ports will be shown. If
there are multi instances on this bridge, the parameters of the port on different instances will be shown.
Parameters
Parameters Description
ports
Shows parameters of the designated port numbers which are
distinguished from the parameters of the bridge.
portlist
One of the CLI Value Types, restricts the input value and format
of the ports.
Restrictions
None.
Examples
To show STP ports:
DGS-3200-10:4# show stp ports
Command: show stp ports
MSTP Port Information
Port Index : 1 , Hello Time : 2 /2 , Port STP : enabled
External PathCost : Auto/200000 , Edge Port : No /No , P2P : False/No
Port RestrictedRole : False, Port RestrictedTCN : False
Port Forward BPDU : Enabled
Msti Designated Bridge Internal PathCost Prio Status Role
----- ------------------ ----------------- ---- ---------- ----------
0 N/A 200000 128 Disabled Disabled
2 N/A 200000 128 Disabled Disabled
DGS-3200-10:4#
16-4 show stp mst_config_id
Purpose
Used to show the MST Configuration Identification as defined in 802.1’s 13.7.