DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
172
19-3 disable mirror
Purpose
Used to disable a previously entered port mirroring configuration.
Format
disable mirror
Description
This command, combined with the enable mirror command above, allows you to enter a port mirroring
configuration into the switch, and then turn the port mirroring on and off without having to modify the port
mirroring configuration.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To disable mirroring configurations:
DGS-3200-10:4#disable mirror
Command: disalbe mirror
Success.
DGS-3200-10:4#
19-4 show mirror
Purpose
Used to show the current port mirroring configuration on the switch.
Format
show mirror
Description
The show mirror command displays the current port mirroring configuration on the switch.
Parameters
None.
To Next Page
Loading...
