D-Link DGS-3200 SERIES - Page 197

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
197
Description
The display per-port LACP mode.
Parameters
Parameters Description
portlist
Specified a range of ports to be configured.
If no parameter is specified, the system will display current LACP and
all port status.
Restrictions
None.
Example
To show port LACP mode:
DGS-3200-10:4#show lacp_ports
Command: show lacp_ports
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
DGS-3200-10:4#