D-Link DGS-3200 SERIES - Page 389

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
389
Description
The show 802.1p default_priority command displays the current default priority settings on the switch.
Parameters
Parameters Description
portlist
Specified a range of ports to be displayed.
If no parameter is specified, the system will display all ports with
802.1p default_priority.
Restrictions
None.
Examples
To display 802.1p default priority:
DGS-3200-10:4# show 802.1p default_priority
Command: show 802.1p default_priority
Port Priority Effective Priority
---- ----------- ------------------
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
9 0 0
10 0 0
DGS-3200-10:4#