DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
397
Description
The show dhcp_relay command displays the current DHCP relay configuration.
Parameters
Parameters Description
ipif_name
The IP interface name.
If no parameter is specified , the system will display all DHCP relay
configurations.
Restrictions
None.
Examples
To display the DHCP relay status.
DGS-3200-10:4# show dhcp_relay ipif System
Command: show dhcp_relay ipif System
DHCP/BOOTP Relay Status : Disabled
DHCP/BOOTP Hops Count Limit : 4
DHCP/BOOTP Relay Time Threshold : 0
DHCP Relay Agent Information Option 82 State : Disabled
DHCP Relay Agent Information Option 82 Check : Disabled
DHCP Relay Agent Information Option 82 Policy : Replace
Interface Server 1 Server 2 Server 3 Server 4
------------- --------------- ---------------- --------------- --------------
System 10.48.74.122 10.23.12.34 10.12.34.12 10.48.75.121
DGS-3200-10:4#
To Next Page
Loading...
