D-Link DWS-3000 Series

100 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Format no set igmp maxresponse <vlan_id>
Mode VLAN Config
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
waits for a query to be received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0
indicates an infinite time-out, i.e. no expiration.
Default 0
Format
set igmp mcrtrexpiretime <0-3600>
Modes Global Config
Interface Config
Format
set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode VLAN Config
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
Format
no set igmp mcrtrexpiretime
Modes Global Config
Interface Config
Format
no set igmp mcrtrexpiretime <vlan_id>
Mode VLAN Config
set igmp mrouter
This command configures the VLAN ID (<vlanId>) that has the multicast router mode
enabled.
Format
set igmp mrouter <vlan_id>
Mode Interface Config
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (<vlan_id>).
Format
no set igmp mrouter <vlan_id>
Mode Interface Config
set igmp mrouter interface
This command configures the interface as a multicast router interface. When configured as a
multicast router interface, the interface is treated as a multicast router interface in all VLANs.