EasyManua.ls Logo

D-Link DWS-3000 Series

D-Link DWS-3000 Series
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
216 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Bytes Transmitted Total bytes the client has transmitted
Bytes Received Total bytes the client has received
Packets Transmitted Total packets the client has transmitted
Packets Received Total packets the client has received
show captive-portal interface client status
This command displays information about clients authenticated on all interfaces or a specific
interface.
Format
show captive-portal interface [slot/port] client status
Mode Privileged EXEC
Intf Valid slot and port number separated by forward slashes.
Intf Description Describes the interface.
Client MAC Address Identifies the MAC address of the wireless client (if applicable)
If you use the optional
[slot/port] information, the following additional information
appears:
Client IP Address Identifies the IP address of the wireless client (if applicable)
Protocol Mode Shows the current connection protocol, which is either HTTP or HTTPS
Ver if ica tion Mod e Shows the current account type, which is Guest, Local, or RADIUS.
CP ID Shows the captive portal ID the connected client is using.
CP Name Shows the name of the captive portal the connected client is using.
User Name Displays the user name (or Guest ID) of the connected client
show captive-portal configuration client status
This command displays the clients authenticated to all captive portal configurations or a
specific configuration.
Format
show captive-portal configuration [cp-id] client status
Mode Privileged EXEC
CP ID Shows the captive portal ID the connected client is using.
CP Name Shows the name of the captive portal the connected client is using.
Client MAC Address Identifies the MAC address of the wireless client (if applicable)
If you use the optional
[cp-id] information, the following additional information appears:
Client IP Address Identifies the IP address of the wireless client (if applicable)
Protocol Mode Shows the current connection protocol, which is either HTTP or HTTPS
Ver if ica tion Mod e Shows the current account type, which is Guest, Local, or RADIUS.

Table of Contents

Other manuals for D-Link DWS-3000 Series

Related product manuals