146 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Client Roam Timeout (secs) Shows how long to wait before a client that disassociates from
this AP or a neighbor AP must re-authenticate when it associates again.
Country Code Shows the country in which the WLAN is operating.
Peer Group ID Shows the Peer group ID.
show wireless country-code
This show command displays the country codes configurable on the Unified Switch.
Format
show wireless country-code
Mode Privileged EXEC
Code Shows the 2-letter country code.
Country Shows the name of the country associated with the code.
show wireless country-code channels
This show command displays the channels that can be configured for different physical radio
modes for the configured country code and regulatory domain.
Format
show wireless country-code channels
Mode Privileged EXEC
Channel Lists the available RF channel.
Mode Shows which mode is allowed for the corresponding channel. Possible values
are:
B—802.11b
G—802.11g
Atheros—Atheros 2.4 GHz or 5 GHz modes (including Dynamic)
A—802.11A
show wireless discovery
This show command displays the configured Unified Switch discovery methods.
Format
show wireless discovery
Mode Privileged EXEC
IP Polling Mode Shows whether the L3 IP Polling discovery method is enabled
L2 Multicast Discovery Mode Shows whether the L2 Multicast Discovery Mode is enabled
show wireless discovery ip-list
This show command displays the configured Unified Switch IP polling list and the polling
status for each configured IP address for discovery.
Format
show wireless discovery ip-list
To Next Page
Loading...
