110 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
show lldp remote-device
Use this command to display summary information about remote devices that transmit current
LLDP data to the system. You can show information about LLDP remote data received on all
ports or on a specific port.
Format
show lldp remote-device {<slot/port> | all}
Mode Privileged EXEC
Local Interface The interface that received the LLDPDU from the remote device.
Chassis ID The ID of the remote device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
show lldp remote-device detail
Use this command to display detailed information about remote devices that transmit current
LLDP data to an interface on the system.
Format
show lldp remote-device detail <slot/port>
Mode Privileged EXEC
Local Interface The interface that received the LLDPDU from the remote device.
Chassis ID Subtype The type of identification used in the Chassis ID field.
Chassis ID The chassis of the remote device.
Port ID Subtype The type of port on the remote device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
System Description Describes the remote system by identifying the system name and ver-
sions of hardware, operating system, and networking software supported in
the device.
Port Description Describes the port in an alpha-numeric format. The port description is con-
figurable.
System Capabilities Supported Indicates the primary function(s) of the device.
System Capabilities Enabled Shows which of the supported system capabilities are enabled.
Management Address For each interface on the remote device with an LLDP agent, lists the
type of address the remote LLDP agent uses and specifies the address used to
obtain information related to the device.
Time To Live The amount of time (in seconds) the remote device's information received in
the LLDPDU should be treated as valid information.
show lldp local-device
Use this command to display summary information about the advertised LLDP local data. This
command can display summary information or detail for each interface.
To Next Page
Loading...
