DiffServ Show Commands 243
5 Quality of Service (QoS) Commands
show diffserv
This command displays the DiffServ General Status Group information, which includes the
current administrative mode setting as well as the current and maximum number of rows in
each of the main DiffServ private MIB tables. This command takes no options.
Format
show diffserv
Mode Privileged EXEC
DiffServ Admin mode The current value of the DiffServ administrative mode.
Class Table Size The current number of entries (rows) in the Class Table.
Class Table Max The maximum allowed entries (rows) for the Class Table.
Class Rule Table Size The current number of entries (rows) in the Class Rule Table.
Class Rule Table Max The maximum allowed entries (rows) for the Class Rule Table.
Policy Table Size The current number of entries (rows) in the Policy Table.
Policy Table Max The maximum allowed entries (rows) for the Policy Table.
Policy Instance Table Size Current number of entries (rows) in the Policy Instance Table.
Policy Instance Table Max Maximum allowed entries (rows) for the Policy Instance Table.
Policy Attribute Table Size Current number of entries (rows) in the Policy Attribute Table.
Policy Attribute Table Max Maximum allowed entries (rows) for the Policy Attribute Table.
Service Table Size The current number of entries (rows) in the Service Table.
Service Table Max The maximum allowed entries (rows) for the Service Table.
show policy-map
This command displays all configuration information for the specified policy. The
<policyname> is the name of an existing DiffServ policy.
Format
show policy-map [policyname]
Mode Privileged EXEC
If the Policy Name is specified the following fields are displayed:
Policy Name The name of this policy.
Type The policy type (Only inbound policy definitions are supported for this plat-
form.)
The following information is repeated for each class associated with this policy (only those
policy attributes actually configured are displayed):
Assign Queue Directs traffic stream to the specified QoS queue. This allows a traffic classi-
fier to specify which one of the supported hardware queues are used for han-
dling packets belonging to the class.
Class Name The name of this class.
Committed Burst Size (KB) The committed burst size, used in simple policing.
Committed Rate (Kbps) The committed rate, used in simple policing,
To Next Page
Loading...
