D-Link DWS-3000 Series

288 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Default enabled
Format
ip dhcp conflict logging
Mode Global Config
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
no ip dhcp conflict logging
Mode Global Config
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If “*” is
specified, the bindings corresponding to all the addresses are deleted.
<address> is a valid IP
address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Format
clear ip dhcp binding {<address> | *}
Mode Privileged EXEC
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Format
clear ip dhcp server statistics
Mode Privileged EXEC
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The server
detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is
used as the address parameter.
Default none
Format
clear ip dhcp conflict {<address> | *}
Mode Privileged EXEC
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no
IP address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp binding [<address>]
Modes Privileged EXEC
User EXEC