D-Link DWS-3000 Series

Wireless Network Commands 161
4 Wireless Commands
no wep tx-key
The no version of this command sets the WEP transmit key index to its default value.
Format
no wep tx-key
Mode Network Config
mac authentication
This command enables and configures the mode for client MAC authentication on the
network.
Default Disable
Format
mac authentication {local | radius}
Mode Network Config
local Enable MAC authentication using the AP profile MAC authentication list.
radius Enable MAC authentication using the configured RADIUS server.
no mac authentication
The no version of this command disables MAC authentication on the network.
Format
no mac authentication
Mode Network Config
radius use-ap-profile
This command indicates to use the global AP profile RADIUS configuration for
authentication on this network.
Default Enable
Format
radius use-ap-profile
Mode Network Config
no radius use-ap-profile
The no version of this command indicates to override the global AP profile RADIUS
configuration with the network RADIUS parameters.
Format
no radius use-ap-profile
Mode Network Config
radius server host
This command configures the RADIUS server IP address for network authentication. The
<ipaddr> variable is the IP Address of the RADIUS server.
Format
radius server host <ipaddr>