D-Link DWS-3000 Series

150 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
bg Configure channel plan mode for 802.11b/g.
interval Compute and apply new channel plans at the configured interval.
manual Compute and apply new channel plans only when requested via the UI.
time Compute and apply a new channel plan at the configured time.
channel-plan interval
This command configures the channel plan interval for each 802.11a and 802.11b/g frequency
band. When the corresponding channel plan mode is configured for interval, this parameter
indicates how often new channel plans are computed and applied.
Default 6
Format
channel-plan {a | bg} interval <6-24>
Mode Wireless Config
a Configure channel plan mode for 802.11a.
bg Configure channel plan mode for 802.11b/g.
6-24 The channel plan interval in hours.
no channel-plan interval
The no version of this command returns the configured channel plan interval to the default.
Format
no channel-plan {a | bg} interval
Mode Wireless Config
channel-plan time
This command configures the channel plan time for each 802.11a and 802.11b/g frequency
band. When the corresponding channel plan mode is configured for time, this parameter
indicates the time of day a new channel plan is computed and applied.
Default 00:00
Format
channel-plan {a | bg} time <hh:mm>
Mode Wireless Config
a Configure channel plan mode for 802.11a.
bg Configure channel plan mode for 802.11b/g.
hh:mm The channel plan time in 24 hour time.
no channel-plan time
The no version of this command returns the configured channel plan time to the default.
Format
no channel-plan {a | bg} time
Mode Wireless Config