Switch Managed Access Point Commands 191
4 Wireless Commands
macaddr Switch managed AP MAC address.
1-2 The radio interface on the AP.
MAC Address The Ethernet address of the switch managed AP.
Location A location description for the AP, this is the value configured in the valid AP
database (either locally or on the RADIUS server).
Radio Indicates the radio interface on the AP.
Channel If the radio is operational, the current operating channel for the radio.
Transmit Power If the radio is operational, the current transmit power for the radio.
Associated Clients Total count of clients associated on the physical radio, this is a sum of all
the clients associated to each VAP enabled on the radio.
Total Neighbors Total number of neighbors (both APs and clients) that can be seen by this
radio in its RF area.
Eligible Channel List The list of eligible channels the AP reported to the switch for channel
assignment. This list is based on country code, hardware capabilities, and any
configured channel limitations.
Fixed Channel Indicator This flag indicates if a fixed channel is configured and assigned to
the radio. A fixed channel can be configured in the valid AP database (locally
or on a RADIUS server).
Manual Channel Adjustment Status Indicates the current state of a manual request to
change the channel on this radio.
Fixed Power Indicator This flag indicates if a fixed power setting is configured and assigned
to the radio. A fixed transmit power can be configured in the valid AP data-
base (locally or on a RADIUS server).
Manual Power Adjustment Status Indicates the current state of a manual request to change
the power setting on this radio.
WLAN Utilization Indicates the total network utilization for the physical radio. This value is
based on radio statistics.
show wireless ap radio channel status
This command displays the manual channel adjustment status for a radio on a switch managed
AP. This indicates the individual AP status for a wireless channel plan apply request or a
wireless AP channel set request.
Format
show wireless ap <macaddr> radio <1-2> channel status
Mode Privileged EXEC
macaddr switch managed AP MAC address.
1-2 Radio Interface.
Channel If the radio is operational, the current operating channel for the radio.
Manual Channel Adjustment Status Indicates the current state of a manual request to
change the channel on this radio.
To Next Page
Loading...
