196 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
RTS Success Count Count of CTS frames received in response to an RTS frame.
RTS Failure Count Count of CTS frames not received in response to an RTS frame.
ACK Failure Count Count of ACK frames not received when expected.
Received Fragment Count Count of successfully received MPDU frames of type data or
management.
Multicast Received Frame Count Count of MSDU frames received with the multicast bit
set in the destination MAC address.
FCS Error Count Count of FCS errors detected in a received MPDU frame.
Transmitted Frame Count Count of each successfully transmitted MSDU.
WEP Undecryptable Count Count of encrypted frames received and the key configuration
of the transmitter indicates that the frame should not have been encrypted or
that frame was discarded due to the receiving station not implementing the
privacy option.
show wireless ap radio vap statistics
This command displays statistics for each VAP on a switch managed AP radio. All parameters
are required, and the command displays a detailed view of the current statistics.
Format
show wireless ap <macaddr> radio <1-2> vap <0-7> statistics
Mode Privileged EXEC
macaddr Switch managed AP MAC address
1-2 The radio interface on the AP
0-7 VA P ID
MAC Address The Ethernet address of the switch managed AP.
Location A description for the AP, this is the value configured in the valid AP database
(either locally or on the RADIUS server).
Radio Indicates a radio interface on the AP.
VA P Indicates the VAP ID on the radio.
WLAN Packets Received Total packets received by the AP on this VAP.
WLAN Bytes Received Total bytes received by the AP on this VAP.
WLAN Packets Transmitted Total packets transmitted by the AP on this VAP.
WLAN Bytes Transmitted Total bytes transmitted by the AP on this VAP.
Client Association Failures Number of clients that have been denied association to the VAP.
Client Authentication Failures Number of clients that have failed authentication to the VAP.
show wireless ap download
This command displays global configuration and status for an AP code download request. It
does not accept any parameters.
To Next Page
Loading...
Need help?
General
