EasyManua.ls Logo

D-Link DWS-3000 Series

D-Link DWS-3000 Series
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
102 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the VLAN.
Group Membership Interval The amount of time in seconds that a switch will wait for a
report from a particular group on a particular interface, which is participating
in the VLAN, before deleting the interface from the entry.This value may be
configured.
Maximum Response Time The amount of time the switch waits after it sends a query on an
interface, participating in the VLAN, because it did not receive a report for a
particular group on that interface. This value may be configured.
Multicast Router Expiry Time The amount of time to wait before removing an interface
that is participating in the VLAN from the list of interfaces with multicast
routers attached. The interface is removed if a query is not received. This
value may be configured.
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Format
show igmpsnooping mrouter interface <slot/port>
Mode Privileged EXEC
Interface The port on which multicast router information is being displayed.
Multicast Router Attached Indicates whether multicast router is statically enabled on the
interface.
VLAN ID The list of VLANs of which the interface is a member.
show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
Format
show igmpsnooping mrouter vlan <slot/port>
Mode Privileged EXEC
Interface The port on which multicast router information is being displayed.
VLAN ID The list of VLANs of which the interface is a member.
show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the MFDB table.
Format
show mac-address-table igmpsnooping
Mode Privileged EXEC
MAC Address A multicast MAC address for which the switch has forwarding or filtering
information. The format is two-digit hexadecimal numbers that are separated
by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
address is displayed as a MAC address and VLAN ID combination of 8 bytes.
Type The type of the entry, which is either static (added by the user) or dynamic
(added to the table as a result of a learning process or protocol).
Description The text description of this multicast table entry.

Table of Contents

Other manuals for D-Link DWS-3000 Series

Related product manuals