D-Link DWS-3000 Series

Unified Switch Channel and Power Commands 151
4 Wireless Commands
channel-plan history-depth
This command configures the number of channel plan history iterations that are maintained for
each 802.11a and 802.11b/g frequency band. The number of iterations stored for each channel
plan affects channel assignment; the channel algorithm will not assign the same channel to an
AP more than once within the number of stored iterations of the channel plan.
Default 5
Format
channel-plan {a | bg} history-depth <0-10>
Mode Wireless Config
a Configure channel plan mode for 802.11a.
bg Configure channel plan mode for 802.11b/g.
0-10 Channel plan history depth.
no channel-plan history-depth
The no version of this command returns the history depth for the channel plan to the default.
Format
no channel-plan {a | bg} history-depth
Mode Wireless Config
power-plan mode
This command configures the power plan mode for managed APs. If it is <interval>, power
adjustments are computed and applied at every defined interval. If it is <manual>, you must
start and apply proposed power adjustments manually.
Default manual
Format
power-plan mode {interval | manual}
Mode Wireless Config
interval Compute and apply power adjustments at the configured interval.
manual Compute and apply power adjustments only when requested via the UI.
power-plan interval
This command configures the power adjustment interval. When the power plan mode is
configured for interval, this parameter indicates how often new power adjustments are
computed and applied.
Default 4
Format
power plan interval <1-24>
Mode Wireless Config
1-24 The power plan interval in hours.