D-Link DWS-3000 Series

178 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Mode AP Profile Radio Config
max-clients
This command configures the maximum number of simultaneous client associations allowed
on the radio interface.
Default 256
Format
max-clients <0-256>
Mode AP Profile Radio Config
0-256 Maximum number of simultaneous associations allowed on the radio inter-
face
no max-clients
The no version of this command configures the maximum number of simultaneous client
associations allowed on the radio interface to the default value.
Format
no max-clients
Mode AP Profile Radio Config
channel auto
This command enables auto channel adjustment for the radio. This indicates the initial AP
channel assignment can be automatically adjusted by the switch. If the optional parameter is
specified, selection for the 802.11a channels is limited to a pre-defined subset of channels; this
only applies to a radio in 802.11a mode.
Default Disabled
Format
channel auto [limit-a-channels]
Mode AP Profile Radio Config
no channel auto
The no version of this command without any parameters disables auto channel adjustment for
the radio. If the optional parameter is specified, it only disables limiting the selection of the
802.11a channels.
Format
no channel auto [limit-a-channels]
Mode AP Profile Radio Config
power auto
This command enables auto power adjustment for the radio. This indicates the AP power
assignment can be automatically adjusted by the switch.
Default Disabled
Format
power auto