D-Link DWS-3000 Series

40 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Format shutdown all
Mode Global Config
no shutdown all
This command enables all ports.
Format
no shutdown all
Mode Global Config
speed
This command sets the speed and duplex setting for the interface.
Format
speed {<100 | 10> <half-duplex | full-duplex>}
Mode Interface Config
Acceptable values are:
100h 100BASE-T half duplex
100f 100BASE-T full duplex
10h 10BASE-T half duplex
10f 10BASE-T full duplex
speed all
This command sets the speed and duplex setting for all interfaces.
Format
speed all {<100 | 10> <half-duplex | full-duplex>}
Mode Global Config
Acceptable values are:
100h 100BASE-T half-duplex
100f 100BASE-T full duplex
10h 10BASE-T half duplex
10f 10BASE-T full duplex
show port
This command displays port information.
Format
show port {<slot/port> | all}
Mode Privileged EXEC
Interface Valid slot and port number separated by forward slashes.
Type If not blank, this field indicates that this port is a special type of port. The pos-
sible values are: