Datalogic DS8110 User Manual

DS8110 REFERENCE MANUAL
102
4
Field Name
Action/Definition
Global No Read
String (max. 128
chars)
Click to activate the Text Entry Tool and create a string to be displayed
when Global No Read Message is selected from the No Read Message drop-
down list. Click Submit to save your text to the origin window text field, or click
Cancel to return to origin window without transferring text.
Multi Filters
Select the check box to display the Multi-Filter Settings options.
Code Collection Settings
Associate Same
Codes When Read
By Different
Scanners
Select the check box to enable this function.
This parameter is available only when the Code Combination parameter is set
to Code Collection and the scanner role is Master. If enabled, it allows
transmitting all codes belonging to the same programmed Slot (same
symbology and content) but read by different scanners (including the Master) in
a single instance.
Scanner Role:
 Master SYNCHRONIZED: The scanner is connected as a Master in a
master/slave synchronized configuration.
 Slave SYNCHRONIZED: The scanner is connected as a Salve in a
master/slave synchronized configuration. (See note below.)
 Other: This selection is for a stand-alone scanner.
Code Different
When Scan Gap Is
Greater Than
This parameter is available only when the Code Combination parameter is set
to Code Collection. If the number of scans performed between two
consecutive codes read (by the Master or Stand Alone scanner) is greater than
the defined number, the codes will be considered as different.
The parameter set to 0 means the filter is disabled: when there is no scan gap
all the consecutive codes read will be considered as only one code.
Code Different
When Code
Position Gap Is
Greater Than
This parameter is available only when the Code Combination parameter is set
to Code Collection. If the position gap between two consecutive codes read (by
the Master or Stand Alone scanner) on the same scan line is greater than the
defined gap number, the codes will be considered as different.
The parameter set to 0 means the filter is disabled: when there is no code
position gap all the consecutive codes read will be considered as only one
code.

Datalogic DS8110 Specifications

General

Brand	Datalogic
Model	DS8110
Category	Barcode Reader
Language	English