Datalogic DS8110 - Page 124

DS8110 REFERENCE MANUAL
112
4
Field Name
Action/Definition
Setup Network (ETH2)
Setup IP
Address
Enter the Internet Protocol (IP) network address for ETH2 (Setup) in the field
provided. Consult your network administrator to obtain a new address.
Setup Netmask
Enter the subnet mask address for ETH2 (Setup) in the field provided. Consult your
network administrator to obtain a new address.
3. When you have finished making changes, click Update All to save all pending changes,
click Reset All to revert to all previously saved values, and click Reset Page to revert to
previous saved values on the current page.
0.