Datalogic DS8110 User Manual

DS8110 REFERENCE MANUAL
76
4
Field Name
Action/Definition
Check Digit
Select the check box to improve decoding safety: it is generally the last digit aligned to
the right of the code and verifies the validity of the preceding digits. The calculation
technique and number of check digits depend on the code selected.
It is advised to enable the check digit whenever correct code identification is difficult. The
following barcode symbologies include check digits in their definitions:
 Code 128
 EAN/UPC
 Code 93
For these symbologies the check digit control is not allowed.
Check Digit
Type
Select a customized check digit for Standard, German, DHL, Daimler-Chrysler, or
Bosch from the drop-down list.
Check Digit
Tx
Select the check box to include the Check Digit in the code transmitted.
Bar Count
Select Variable or an available value from the drop-down list. The Bar Count allows to
further specify the number of elements in the read code for Code 128, GS1-128, Code
93, ISBT 128 or Code 39 Full ASCII.
For these codes, the same number of barcode elements (bars + spaces) can be
associated with a different number of characters.
 Variable: to select the correct number of characters, set Label Length to the
desired fixed value and Bar Count to Variable
12
Code 128
Subset A
12
Code 128
Subset C
Digit Number 2, Bar Count variable
 Code 128 or GS1-128: from 25 to 499 - a variable number of characters in
steps of 6.
 Code 93 or ISBT 128: from 25 to 385 - a variable number of characters in
steps of 6.
 Code 39 Full ASCII: from 29 to 619 - a variable number of characters in steps
of 10.
To select a particular barcode length in elements, set Bar Count to the desired
fixed value and Label Length to Variable.
12
Code 128
Subset A
1234
Code 128
Subset C
Digit Number variable, Bar Count 31

Datalogic DS8110 Specifications

General

Brand	Datalogic
Model	DS8110
Category	Barcode Reader
Language	English