Internal Network Configurations
Product Reference Guide 167
When the job opens, pause run mode and configure the Slave specific
parameters. These depend on the application and include the following:
• photometric parameters (Image Auto-Setup feature in the Advanced Setup –
Im
age Settings step)
• Acquisition Trigger Delays necessary to avoid lighting interference between
adjace
nt or oppositely positioned readers (Reading Phase step)
• Images Saving if used (Data Formatting step)
• Encoder Sensor: if used (for all Slaves, the Encoder Type must be set to
In
ternal)
Verify the focus and decoding with the capture image button.
To Next Page
Loading...
