CBX Electrical Connections
68
Matrix 300N
ID-NET Response Time
The following figure shows the response time of the ID-NET network. This time
is defined as the period between the Trigger activation and the beginning of data
transmission to the Host.
Figure 41 - ID-NET Response Time
Conditions
• ID-NET M/S Synchronized layout
• message length = 50 bytes per node
ID-NET Network Termination
The network must be properly terminated in the first and last reader of the
network. This is done by setting the ID-NET Termination Resistance Switch in the
CBX100/500 to ON.
To Next Page
Loading...
