Datalogic Matrix 300N - Advanced Setup for Manual Adjustable Focus Models

Rapid Configuration
24 Matrix 300N
Advanced Setup for Manual Adjustable Focus Models
NOTE
To begin configuration, the reader must be correctly mounted at the correct
reading distance for your application so that its Field of View covers the
application reading area.
1. From the Task Area select Open Device Configuration.
2. The Open Device Configuration window opens showing the list of currently
sa
ved configurations (jobs) saved on the device. For new devices, the only
saved job is the Default configuration. Click OK. The device enters run
mode and begins acquiring images.
3. Click on the Advanced Setup button and press the Play icon.
For Software Adjustable Focus models go to page 17 then continue the configuration
with the "
Reading Phase" on page 31.