Datalogic Matrix 300N - On-Board Ethernet Interface; User Interface - Serial Host

On-Board Ethernet Interface
Product Reference Guide 83
On-Board Ethernet Interface
The on-board Ethernet Interface can be used for TCP/IP communication with a
remote or local host computer by connecting the reader to either a LAN or
directly to a host PC. There is no need to use a crossover adapter since Matrix
300N incorporates an auto-cross function.
A CAB-ETH-M0x c
able can be used to connect to a LAN.
On the Matrix 300N on-board Ethernet interface the following communication
c
hannels are available:
• TCP Client
•TCP Server
•UDP Channel
•FTP Client
The following Fieldbus protocols are also available over the on-board Ethernet
in
terface:
• EtherNet/IP
• PROFINET IO
• Modbus TCP Client
For further details refer to the Help On Line page of the Reading Phase step
(Cha
nnels) and (Fieldbuses) in DL.CODE.
User Interface - Serial Host
The following table contains the pinout for standard RS232 PC Host interface.
For other user interface types please refer to their own manual.
RS232 PC-side Connections
1
5
9
6
9-pin male connector
13
25
14
1
25-pin male connector
Pin Name Pin Name
2 RX 3 RX
3 TX 2 TX
5 GND 7 GND