Software Configuration
176
Matrix 300N
Restore Defaults
The device parameters are divided into two main classes, Configuration and
Environment which are affected differently by the Restore Defaults commands.
• The Configuration parameters are the ones set in the various steps of the
c
onfiguration process and are specific to each application. When multiple
configurations (jobs) are saved on a single device, these parameters can be
different from one configuration to the next.
• Environment parameters regard the device Identity and Position in a Net-
work (Ethernet, ID-NET, etc.) and are not influenced by the Default (or any
oth
er) Configuration present in memory.
Restore Default Startup Configuration
The Default configuration is always present on the reader and in fact it is not
modifiable and cannot be deleted. It can always be restored by simply selecting it
from the Open from Device configuration list.
To Next Page
Loading...
