Datalogic Matrix 300N User Manual

References
viii Matrix 300N
Conventions
WARNING
CAUTION
NOTE
This manual uses the following conventions:
"User" refers to anyone using a Matrix 300N reader.
"Reader" refers to the Matrix 300N reader.
"You" refers to the System Administrator or Technical
Support person using this
manual to install, configure, operate, maintain or troubleshoot a Matrix 300N
reader.
This symbol alerts the user they are about to perform a dangerous action that could
result in personal injury as well as damage to the device if not performed correctly.
Examples involve exposure to dangerous levels of voltage or electrical shock hazards.
This symbol identifies a hazard or procedure
that, if incorrectly performed, could
cause equipment damage. It is also used to bring the user’s attention to details that
are considered IMPORTANT.
This symbol draws attention to details or pro
cedures that may be useful in improving,
maintaining, or enhancing the performance of the hardware or software being dis-
cussed.

Datalogic Matrix 300N Specifications

General

Type	Barcode module bar barcode readers
Sensor type	CMOS
Scanner type	1D/2D
Yaw reading angle	0 - 24 °
Optical sensor resolution	1024 pixels
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code
Input voltage	10 - 30 V
Power consumption (typical)	5 W
Connectivity technology	Wired
Certification	AIM DPM, ISO/IEC 15415, ISO/IEC 15416, ISO/IEC 16022, ISO/IEC 18004, AS9132A
Product color	Blue, Metallic
Housing material	Aluminium, Plastic
International Protection (IP) code	IP67
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Depth	54 mm
Width	75 mm
Height	62 mm
Weight	238 g