Backup and Restore Through DL.CODE
Product Reference Guide 173
Backup
To perform a Backup:
1. From the DL.CODE Device menu, select either Single Reader
Backup (to file
on PC); or Backup to external storage device.
NOTE
You will be reminded that configuration in temporary memory will not be saved
so you should save the configuration to the reader before performing Backup.
If you are performing a backup to a file you will be asked whether to include the
firmware or not.
At the end of the backup, DL.CODE shows a message indicating successful
completion.
For ID-NET network Backup, select the Backup current Internal Network configura-
tions selection.
To Next Page
Loading...
