Indicator and Keypad Button
Product Reference Guide 41
Indicator and Keypad Button
Figure 13 - Indicators
The following LED indicators are located on the reader:
PWR
blue LED indicates that the r
eader is connected to the
power supply (Figure 13, 1)
NET
yellow LED indicates connec
tion to the on-board
Ethernet network (Figure 13, 2)
In
normal operating mode the colors and meaning of the five LEDs are illustrated
in the following table:
STATUS red LED indicates a NO R
EAD result (Figure 13, 3)
COM
yellow LED indicates active communication on the main
s
erial port * (Figure 13, 4)
TRIGGER
yellow LED indicates the status of the reading phase
(Figure 13, 5)
GOOD green LED confirms successful reading (Figure 13, 6)
READY
green LED indicates that the reader is ready to
o
perate (Figure 13, 7)
* When connected to a Fieldbus network through the CBX500, the COM LED is
al
ways active, even in the absence of data transmission, because of polling
activity on the Fieldbus network.
During the reader startup (reset or restart phase), these five LEDs blink for one
second.
To Next Page
Loading...
