Restore Defaults
Product Reference Guide 177
The same action can be performed from the Device menu >Backup/Restore >
Restore Defaults > Restore Default Startup Configuration. The Default
Configuration will be set to run at startup and the reader will be reset.
Any previously saved configurations on the device will remain in memory, but
the Default configuration is set as the startup configuration.
Restore Default Environment
Restore Default Environment returns all Environment parameters to their factory
default settings. The default IP address will be restored as well as all the
parameters managed in the Device Environment Configuration window.
The Factory Default static IP
address for all Matrix N Family
readers is:
IP Address = 192.168.3.100
Any previously saved configurations on the device will remain in memory, but
the De
fault configuration is set as the startup configuration.
To Next Page
Loading...
