Datalogic Matrix 300N - Output 1 and 2 Connections Using Matrix 300 N Power

CBX Electrical Connections
80 Matrix 300N
Output 1 and 2 Connections Using Matrix 300N Power
CAUTION
Output 2 Device
Power to
Output Device
Output Device
Reference
Output
Signal
Output 1 Device
Power to
Output Device
Output
Device
Reference
Output
Signal
Figure 56 - PNP/Open Emitter Output Using Matrix 300N Power
Output 2 Device
Power to
Output Device
Output Device
Reference
Output
Signal
Output 1 Device
Power to
Output Device
Output Device
Reference
Output Signal
Figure 57 - NPN/Open Collector Output Using Matrix 300N Power
Output 1 and 2 Connections Using External Power
Output 2 Device
Output
Signal
Output 1 Device
Output
Signal
Pulled up to External
Output Device Power
Pulled up to External
Output Device Power
Figure 58 - PNP/Open Emitter Output Using External Power
Power from the Vdc/GND spring clamps is available directly to the Output Device on
the +V/-V spring clamps, and does not pass through the Power Switch (ON/OFF)
inside the CBX. Disconnect the power supply when working inside the CBX.