Software Configuration
172
Matrix 300N
Backup and Restore Through DL.CODE
DL.CODE allows Backup and Restore to be performed to/from the configuration
PC via file or to an external storage device such as BM100.
It can be performed for Single Reader and Internal Network (Master/Slave)
co
nfigurations.
Backup and Restore functions allow performing Complete Configuration and
En
vironment parameter storage for Single Reader and ID-NET (Master/Slave)
network devices as well as device firmware. Backup and Restore can be applied
to any reader connected through a device having external backup memory,
regardless of the reader's network configuration.
Backup to and Restore from external device is
supported by DL.CODE for all
reading devices when connected to:
• CBX + BM100
•QLM-Series Gateways
NOTE
Before executing a Backup to a BM100 backup module make sure the Write Protec-
tion switch is set to Unlocked.
To Next Page
