Illuminators
188
Matrix 300N
These illuminators are made up of 8 LEDs for 1.3 MP models and 10 LEDs for 2
MP models. LEDs are controlled simultaneously by the software application.
These are Bright Field general purpose illuminators. Wide Angle illuminators
cover a larger area over a given distance, whereas Narrow Angle illuminators are
ideal for areas needing a narrower field of coverage further from source.
The
RED
illuminator is an optimum solution for applications where codes are
printed on paper and where Direct Park Marking (DPM) is obtained by ink jet or
laser etching technology on flat non-reflective surfaces, without any evident
machining flaws made by machine tools (e.g. cutters or lathes). The reader’s
pitch or skew angle helps to avoid direct reflection when codes are marked on
very reflective surfaces.
The
WHITE
illuminator is suitable for applications with colored codes and/or
colored backgrounds (e.g. red code on white background) or with mixed color
codes (e.g. blue/red ink on white background).
According to model, the following combinations of ON/OFF lighting
configurations can be obtained.
To Next Page
Loading...
