OPERATION
4 Issue 1 January 2008
offset, or (optionally) use a variable as input (i.e. a
.
ier or later date than the current one, an
be entered here. The value entered will determine how many years,
If an “Offset Value” has been entered, this menu is used to define the units of time the
RTC should skip in. You can choose between years, months, weeks, days or hours.
E.g. if the year is 2002 and you have set the “Offset Value” to 5, and “Year” has been
selected as “Offset Type”, 2007 will be printed out.
1
(1) Use Variable
Specifies whether to use a fixed
prompted variable so the operator can type the desired offset at print time)
(2) Offset Value and Type
If the user requires an RTC showing an earl
“offset” may
months, weeks, days, hours or minutes the RTC should skip.
Offset Type
3
2
(
122) 2786
To Next Page
Loading...
Need help?
General
