MAINTENANCE & FAULT FINDING
Error No.
Error text Action
1024: Transfer failed error between
print unit.
ware.
creen.
Communication
controller and
Incompatible firm
Check the Versions s
1025:
Not ready to transfer
controller and print unit.
Communication error between
1026: Ribbon Warning. reached the
rror/Warning
reen the event
screen.
e remaining ribbon.
The remaining ribbon has
limit specified in the E
screen. On the same sc
is set to cause an error.
Check the Error/warning
Check th
1040: Setting out of range The setting is out of range. Please set
to a correct range
1041: eserved Undefined Error R
1042: Unknown Error Reserved
1043: Design Pointer Not Set Reserved
1044: imeout eserved Design Delete T R
1045: o Big el is too large. Edit the design
el size.
Label Size T The lab
and reduce the lab
1046: No Text Defined Yet Reserved
1047: Upgrade Failed pgrade failed. U
Check the Versions screen.
1048: Special Action Not Found
he error
: Error in firmware. Contact distributor
and supply info on how t
occurred.
1049: CRC Error l files on the controller have a CRC
C checksum does
match.
odified by
or the file is
Al
checksum. The CR
not
Either the file has been m
an unauthorized person,
damaged.
1051: Error incompatible versio
controllers:
The design being loaded is to new
(and hence the controller does not
know how to handle it).
Upgrade the controller to a newer
version.
n Only on non 21CFR_part 11
27864 Issue 1January 2008 (219)
To Next Page
Loading...
Need help?
General
