Emerson FloBoss S600+ - Config600 Configuration Software

S600+ Instruction Manual
Revised July-2017 General Information 1-5
A communications port on the bottom of the panel provides a way to
directly connect to a PC. The front panel interface consists of a backlit
LCD display, a 29-button keypad, and an alarm status LED (see Figure
1-4).
Figure 1-4. Front Display Panel
1.3 Config600 Configuration Software
Using Config 600, you can both send (upload) new or modified
configurations to the S600+ and receive (download) existing
configurations from the S600+. You can also define the following
functions:
 Stream and station totalisation.
 Batch totalisation and correction.
 Three-term PID control.
 Flow balancing.
 Flow scheduling.
 Automatic proving sequence.
 K-factor or meter factor linearisation.
 Valve monitor/control.
 Sampler control.
 Station densitometer.
 Station gas chromatograph.
 Forward, reverse, and premium error totals.
 Comprehensive maintenance mode.
 Reporting.