Emerson FloBoss S600+ - Direction and Menu Keys; Numeric Keys; Operation Keys; Menu Keys

S600+ Instruction Manual
Revised July-2017 Front Panel 5-3
5.3.2 Direction and Menu Keys
The large, oval, four-direction arrow key is located just below the
MENU key (see Figure 5-1). Note the directional arrows (, , ,
and ) in the surface of the four-direction key. Pressing these arrows
allows you to navigate the display matrix and select parameters or data
items to view or change.
Press MENU to return up one level of the display hierarchy. On a data
page, pressing MENU returns you to the parent menu. On a menu
page, pressing ▲ returns you to the Main menu.
5.3.3 Numeric Keys
The numeric keys occupy the lower part of the keypad. They offer the
full number set (0-9), a minus key (–), and a decimal point (.).
 Numeric 0 to 9: Used to enter or change data and to navigate the
display screens.
 Minus: Used to define the default display on the S600+ or to enter
negative numbers.
You can also use the minus key to define access shortcuts to
frequently used displays. Refer to Section 5.9 for further
information.
5.3.4 Operation Keys
You use the Operation keys in conjunction with the numeric keys to
perform a variety of tasks, including:
 Exponent (EXPT): Use the EXPT key to enter numbers in
scientific notation. For example, if the value you need to enter
exceeds the space available on the display (a maximum of 20
characters), you need to express the data in exponential terms.
 CLEAR: Use the CLEAR key to cancel or exit from the current
operation and return to the previous data display. You can also use
CLEAR to activate the default display (if configured).
 Display (DISP): Use the DISP key to enter the path of a required
display. The Status/ID line at the bottom of every data page shows
the display path.
 Change (CHNG): Use the CHNG key to edit a displayed database
item.
Note: You can only change items marked with an asterisk (*).
 PRINT: Use the PRINT key to display the print menu, where you
can submit commands for various pre-configured reports or logs to
a printer or computer terminal.
 Enter ( ): Use this key (called the Enter key in this chapter) in
combination with the numeric and CHNG keys to confirm that you
have entered the data correctly and completed an operational
sequence.