Configuring EAPS on a Switch
ExtremeWare XOS 11.3 Concepts Guide
409
p_1 1
p_2 2
p_3 3
p_4 4
p_5 5
p_6 6
p_7 7
p_8 8
p_9 9
p_10 10
p_11 11
p_12 12
p_13 13
p_14 14
p_15 15
p_16 16
p_17 17
p_18 18
p_19 19
p_20 20
p_21 21
p_22 22
p_23 23
p_24 24
p_25 25
p_26 26
p_27 27
p_28 28
p_29 29
p_30 30
NOTE
You may see a slightly different display, depending on whether you display the master node or the transit node.
The display from the show eaps detail command shows all the information shown in the show eaps
<eapsDomain>
command, but displays information for all configured EAPS domains. Table 57 explains
the fields on the EAPS display.
Table 57: show eaps display fields
Field Description
EAPS Enabled Current state of EAPS on this switch:
• Yes—EAPS is enabled on the switch.
• No—EAPS is not enabled.
EAPS Fast Convergence Displays only when Fast Convergence is on.
Number of EAPS instances Number of EAPS domains created. The maximum number of EAPS
domains per switch is 128.
Name The configured name for this EAPS domain.
To Next Page
Loading...