RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
9-4
Upgrade the Printer Firmware (Continued)
Step Procedure
4 a. Prepare the printer for the Firmware upgrade.
b. Press and hold down the Power and Pause buttons on the Printer (while
you plug in the power). (Note: Both lights will blink slowly.)
5 From the Workbench screen, select Send File To Printer. (Note: Both lights
will flash very fast while the Firmware is going through the update process.)
6 Upon successful completion of the Firmware Update, the Printer will restart.
(Note: The lights will remain solid.)
7 The procedure is now completed.
To Next Page
Loading...
