RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
12-5
Print YMC Under K option, 6-107
printable area, 6-41
Printed cards
dark or light, 4-42
printed image diagram, 6-43
Printer Drivers, 2-3
Printer's memory, 6-41
Printhead, 2-6, 11-15
Printhead power cable, 4-34
Prox Card Encoder, 11-15
Proximity cards, 2-11
PVC, 11-15
PVC laminate, 2-11
Q
Queue, 11-15
R
RAM (Random Access Memory), 11-15
Rasterize, 11-15
Reboot, 11-15
recorded magnetic data, 6-55
Registration, 11-15
Regulatory Compliances, 2-1
Reject Hopper, 4-13
Reset Printer, 4-34
Resident Font, 11-15
Resin, 11-15
resin black (K) panel, 6-96, 6-97, 6-107
Resin Black Panel, 2-7
resin dither, 6-30
Resin Heat slide, 6-39
Resin Thermal Transfer, 2-5
Resolution, 2-4, 11-16
RFI (Radio Frequency Interference), 11-16
RGB (Red/Green/Blue), 11-16
Ribbon, 11-16
Ribbon / Cards, 1-2, 6-1, 7-1
Ribbon cable, 11-16
Ribbon Panels, 6-32
Ribbon Sensor Calibration, 4-55
Ribbon Type option, 6-11
Ribbon wrinkle problems, 4-45
RibbonTraq, 11-16
RMA number, 11-16
Roller, 11-16
Roller Up/Down Error, 4-31
Rotate Front 180 Degrees option, 6-81, 6-102
rotate front by 180 Degrees, 6-35
rotates image, 6-35
RS-232, 11-16
S
safety issues, 1-2, 4-1, 6-1, 7-1, 9-1
Safety Standards, 2-2
Saturation, 11-16
second K Panel, 6-32
Selecting Orientation - Landscape under Card tab, 6-84
Selecting Orientation – Portfolio under Card tab, 6-86
Selecting the number of copies, 6-4
Selecting the Visual Security Solutions, 6-87, 6-88, 6-89
Selecting the Visual Security Solutions dropdown menu,
6-85
Self-test, 4-54, 4-56, 11-17
Sensor, 11-17
Sensors button, 6-44
Serial interface, 11-17
Settings button, 4-51, 4-52
Shift Data Left option, 6-55
SIMM, 11-17
Simplex, 11-17
Smart Card, 11-17
SmartGuard, 11-17
SmartShield™, 11-17
Software, 11-17
special precautions, 1-2, 6-1, 7-1
Split 1 Ribbon Panels, 6-32
Spooler, 11-17
Spooling, 11-18
SS (Start Sentinel), 11-18
SS, ES, FS, 6-66
Stacker, 11-18
Standard Resin Black (K), 2-8
Standard Self-test (YMC), 4-55
Start Sentinel (SS), 6-66
Stepper Motor, 11-18
String, 11-18
Supply Frequency, 2-4
Supply Voltage, 2-4
Surface mount, 11-18
Switch box, 11-18
System Requirements, 2-4
T
TAC, 11-18
Temp file, 11-18
Test Core Pins (Lam), 4-55
Test Core Pins (Print), 4-55
Test Print option, 6-8
Test-print, 11-18
Tests Magnetic Encoding, 4-55
Thermistor, 11-18
Thermocouple, 11-19
Through-hole, 11-19
Timeout, 11-19
TOF (Top of Form), 11-19
Track, 11-19
Track Information, 6-66
track number (1, 2 or 3), 6-66
troubleshoot the Printer, 10-1
Troubleshooting, 11-19
TrueType (TT), 11-19
TrueType black text, 6-96
TÜ V-EMC, 2-1
U
UL, 2-1
Ultra Violet Fluorescing Panel, 2-7
UltraCard, 11-19
To Next Page
Loading...
